Netc Command Reference

Operations: [Config] = Configuration command, [Info] = Information/Status command (using show command)

  • birdc [Config]: switch to internal bird CLI
  • birdc6 [Config]: switch to internal bird CLI for IPv6
  • cluster [Config, Info]: Cluster id
    • mode [Config]: cluster active/standby mode
    • watch [Config]: Bird protocol to watch
  • copy [Config]: destination file name
  • ddos-guard [Config, Info]: ddos protection
    • bgp: bgp configuration - using for bgp flowspec
      • as : bgp as number
      • neighbor-address : bgp neighbor ip address
      • neighbor-as : bgp neighbor as number
      • router-id : bgp router-id
    • enable [Config]: enable ddos-guard
    • reset-baseline [Config]: reset baseline
    • rule [Config, Info]: log level
      • baseline: rule baseline configuration
        • bps [Config]: Bytes per second
        • pps [Config]: Packets per second
      • baseline-coefficient : rule baseline coefficient configuration
      • clear-filters [Config]: clear filters
      • description : description
      • eval-items [Config]: ordered list of items to eval
        • dstip [Config]: Dstip (ipv4 | ipv6)
        • dstip1 [Config]: Dstip1 - octet one (ipv4 | ipv6)
        • dstip2 [Config]: Dstip2 - octet two (ipv4 | ipv6)
        • dstip3 [Config]: Dstip3 - octet three (ipv4 | ipv6)
        • dstip4 [Config]: Dstip4 - octet four (ipv4 | ipv6)
        • dstport [Config]: Dstport
        • dstport1 [Config]: Dstport1 - octet one
        • dstport2 [Config]: Dstport2 - octet two
        • ipflags [Config]: IP flags
        • proto [Config]: Protocol
        • srcip [Config]: Srcip (ipv4 | ipv6)
        • srcip1 [Config]: Srcip1 - octet one (ipv4 | ipv6)
        • srcip2 [Config]: Srcip2 - octet two (ipv4 | ipv6)
        • srcip3 [Config]: Srcip3 - octet three (ipv4 | ipv6)
        • srcip4 [Config]: Srcip4 - octet four (ipv4 | ipv6)
        • srcport [Config]: Srcport
        • srcport1 [Config]: Srcport1 - octet one
        • srcport2 [Config]: Srcport2 - octet two
        • tcpflags [Config]: TCP flags
        • tcpflags1 [Config]: TCP flags 1 - octet one
        • tcpflags2 [Config]: TCP flags 2 - octet two
      • eval-step-msecs : eval step in milliseconds
      • filter-action : drop packets from search result
      • filter-timeout : rule filter-timeout in seconds
      • limit: limit to which algorithm should work in case of exceeded threshold
        • bps [Config]: Bytes per second
        • pps [Config]: Packets per second
      • log-level : log level
      • pass-action : drop packets from search result
      • report-bgp-flowspec: reporting filters via bgp flowspec - discarding
      • report-mail : reporting email address
      • required-items [Config]: required items to valid result
        • dstip [Config]: Dstip (ipv4 | ipv6)
        • dstip1 [Config]: Dstip1 - octet one (ipv4 | ipv6)
        • dstip2 [Config]: Dstip2 - octet two (ipv4 | ipv6)
        • dstip3 [Config]: Dstip3 - octet three (ipv4 | ipv6)
        • dstip4 [Config]: Dstip4 - octet four (ipv4 | ipv6)
        • dstport [Config]: Dstport
        • dstport1 [Config]: Dstport1 - octet one
        • dstport2 [Config]: Dstport2 - octet two
        • ipflags [Config]: IP flags
        • proto [Config]: Protocol
        • srcip [Config]: Srcip (ipv4 | ipv6)
        • srcip1 [Config]: Srcip1 - octet one (ipv4 | ipv6)
        • srcip2 [Config]: Srcip2 - octet two (ipv4 | ipv6)
        • srcip3 [Config]: Srcip3 - octet three (ipv4 | ipv6)
        • srcip4 [Config]: Srcip4 - octet four (ipv4 | ipv6)
        • srcport [Config]: Srcport
        • srcport1 [Config]: Srcport1 - octet one
        • srcport2 [Config]: Srcport2 - octet two
        • tcpflags [Config]: TCP flags
        • tcpflags1 [Config]: TCP flags 1 - octet one
        • tcpflags2 [Config]: TCP flags 2 - octet two
      • reset-baseline [Config]: reset baseline
      • template : rule configuration template
      • test-mail [Config]: send testing email to verify mail configuration
      • threshold: threshold packets or bytes per second configuration
        • bps [Config]: Bytes per second
        • bps-baseline-derived [Config]: Multiply baseline bps
        • bps-min [Config]: Min bytes per second (when using baseline based threshold)
        • pps [Config]: Packets per second
        • pps-baseline-derived [Config]: Multiply baseline pps
        • pps-min [Config]: Min packets per second (when using baseline based threshold)
      • threshold2-steps : threshold2 steps configuration
    • template [Info]: log level
      • baseline: template baseline configuration
        • bps [Config]: Bytes per second
        • pps [Config]: Packets per second
      • baseline-coefficient : template baseline coefficient configuration
      • description : description
      • eval-items [Config]: ordered list of items to eval
        • dstip [Config]: Dstip (ipv4 | ipv6)
        • dstip1 [Config]: Dstip1 - octet one (ipv4 | ipv6)
        • dstip2 [Config]: Dstip2 - octet two (ipv4 | ipv6)
        • dstip3 [Config]: Dstip3 - octet three (ipv4 | ipv6)
        • dstip4 [Config]: Dstip4 - octet four (ipv4 | ipv6)
        • dstport [Config]: Dstport
        • dstport1 [Config]: Dstport1 - octet one
        • dstport2 [Config]: Dstport2 - octet two
        • ipflags [Config]: IP flags
        • proto [Config]: Protocol
        • srcip [Config]: Srcip (ipv4 | ipv6)
        • srcip1 [Config]: Srcip1 - octet one (ipv4 | ipv6)
        • srcip2 [Config]: Srcip2 - octet two (ipv4 | ipv6)
        • srcip3 [Config]: Srcip3 - octet three (ipv4 | ipv6)
        • srcip4 [Config]: Srcip4 - octet four (ipv4 | ipv6)
        • srcport [Config]: Srcport
        • srcport1 [Config]: Srcport1 - octet one
        • srcport2 [Config]: Srcport2 - octet two
        • tcpflags [Config]: TCP flags
        • tcpflags1 [Config]: TCP flags 1 - octet one
        • tcpflags2 [Config]: TCP flags 2 - octet two
      • eval-step-msecs : eval step in milliseconds
      • filter-action : drop packets from search result
      • filter-timeout : template filter-timeout in seconds
      • limit: limit to which algorithm should work in case of exceeded threshold
        • bps [Config]: Bytes per second
        • pps [Config]: Packets per second
      • log-level : log level
      • pass-action : drop packets from search result
      • report-bgp-flowspec: reporting filters via bgp flowspec - discarding
      • report-mail : reporting email address
      • required-items [Config]: required items to valid result
        • dstip [Config]: Dstip (ipv4 | ipv6)
        • dstip1 [Config]: Dstip1 - octet one (ipv4 | ipv6)
        • dstip2 [Config]: Dstip2 - octet two (ipv4 | ipv6)
        • dstip3 [Config]: Dstip3 - octet three (ipv4 | ipv6)
        • dstip4 [Config]: Dstip4 - octet four (ipv4 | ipv6)
        • dstport [Config]: Dstport
        • dstport1 [Config]: Dstport1 - octet one
        • dstport2 [Config]: Dstport2 - octet two
        • ipflags [Config]: IP flags
        • proto [Config]: Protocol
        • srcip [Config]: Srcip (ipv4 | ipv6)
        • srcip1 [Config]: Srcip1 - octet one (ipv4 | ipv6)
        • srcip2 [Config]: Srcip2 - octet two (ipv4 | ipv6)
        • srcip3 [Config]: Srcip3 - octet three (ipv4 | ipv6)
        • srcip4 [Config]: Srcip4 - octet four (ipv4 | ipv6)
        • srcport [Config]: Srcport
        • srcport1 [Config]: Srcport1 - octet one
        • srcport2 [Config]: Srcport2 - octet two
        • tcpflags [Config]: TCP flags
        • tcpflags1 [Config]: TCP flags 1 - octet one
        • tcpflags2 [Config]: TCP flags 2 - octet two
      • test-mail [Config]: send testing email to verify mail configuration
      • threshold: threshold packets or bytes per second configuration
        • bps [Config]: Bytes per second
        • bps-baseline-derived [Config]: Multiply baseline bps
        • bps-min [Config]: Min bytes per second (when using baseline based threshold)
        • pps [Config]: Packets per second
        • pps-baseline-derived [Config]: Multiply baseline pps
        • pps-min [Config]: Min packets per second (when using baseline based threshold)
      • threshold2-steps : threshold2 steps configuration
  • ddos-protector bgp-integration: ddos protector bgp integration
    • as [Config]: AS number
    • edit [Config]: Edit config file
    • enable [Config]: Enable ddp-integration - routemond service
    • stats [Info]: Show DDoS protector stats
  • event [Config, Info]: rest api endpoint
    • action [Config]: script to run when action occurs
      • down [Config]: Deleting a route or interface down
      • up [Config]: New route or interface up
    • watch
      • interface [Config]: interface to watch
      • rest [Config]: rest api endpoint
      • route [Config]: routing table route
        • exact-match [Config]: Exact-match on configured route
        • subnet [Config]: Subnetworks also matched
        • table [Config]: Routing table number
  • interface [Config, Info]: destination interface name
    • arp-reply [Config]
    • bridge-group [Config]
    • channel-group [Config]
    • cluster-id [Config]: bridge interface cluster id
    • description [Config, Info]
    • destination [Config]: gre tunnel destination ip address
    • detail [Info]: Detailed statistics including errors by types
    • disable-size-offload [Config]: disable interface packet size offloading features
    • hw-filter [Config]: set hw filter to interface
      • action [Config]
        • dmask : destination wildcard mask
        • dport : destination port number
        • dst : destination IP address
        • id : filter id
        • proto : protocol name/number
        • smask : source wildcard mask
        • sport : source port number
        • src : source IP address
      • this [Info]: this context
    • hw-queues [Info]: Detailed utilisation of HW queues
    • igmp join [Config]: A multicast group address
    • ipv4
      • address comment [Config]: comment
      • dhcp-relay upstream-interface [Config]: upstream interface
    • ipv6
      • address <ipv6/mask> eui-64 [Config]
      • dhcp-relay [Config]: DCHP Relay upstream interface
        • address : destination address
        • create-pd-route: create IPv6 route from prefix delegation
    • listen-port [Config, Info]: Wireguard port for listening
    • master mac [Config]: mac address
    • mirror-to [Config, Info]: destination interface name
      • in: incomming (rx) traffic
      • out: outgoing (tx) traffic
    • mtu [Config]
    • offload [Info]: interface offloading features
    • peer [Config, Info]: Wireguard peer management
    • port-channel: set port channel/bonding options
      • hash-policy [Config]
      • miimon [Config]
      • mode [Config]
    • private-key [Info]: Wireguard private-key
    • promisc [Config]: Enable promiscuous mode
    • public-key [Info]
    • qos-type speed [Config]: speed limit
    • shutdown [Config]
    • source [Config]: gre tunnel source ip address
    • this [Info]: this context
    • vrrp [Info]: VRRP options
      • [Config]: VRRP group/ID
        • ipv4 [Config, Info]: virtual IP address
        • priority [Config, Info]: VRRP group priority
      • detail [Info]: Detailed VRRP information
  • ipv4: IPv4 configuration
    • arp [Info]: IPv4 neighbour table
      • [Info]
      • interface : interface
    • arp-cache [Config]: arp-cache min. number of entries to keep
    • dhcp-server [Info]: DHCP server options
      • apply [Config]: Apply configuration set in config-file
      • config-file [Config, Info]: Name of the config file
      • edit [Config]: Edit config file
      • leases [Info]: DHCP server leases
    • firewall [Config, Info]
      • apply timeout [Config]: number of seconds to revert the configuration
      • confirm [Config]: confirm/revert previously applied configuration
      • custom-script [Config, Info]: configure IP firewall rules via custom shell script instead of netc
      • edit [Config]: edit custom shell script
      • match-list [Config, Info]: comment
        • action [Config]: IPv4 ACL entry action
          • comment : comment
          • interface : interface
          • ip <ipv4/mask>: IP address
          • mac : MAC address
          • mark : mark
          • net <ipv4/mask>: network
          • port : TCP/UDP/SCTP port
          • protocol : protocol (tcp,udp,sctp,...)
          • timeout : timeout in seconds
        • forceadd: for hash:* types, add entry even if the list is full, random entry will be removed)
        • hashsize : hash size for hash:* match list types
        • key : match list type
        • maxelem : maximum number of elements
        • this [Info]: this context
        • timeout : entry timeout in seconds
      • table chain [Config, Info]: chain name
        • action [Config]: rule action or a custom chain
        • description: IPv4 ACL entry
        • id: rule ID to delete
        • rename [Config]: rename current chain
        • this [Info]: this context
      • this [Info]: this context
    • igmp: IGMP Global configuration
      • groups [Info]: IGMP group membership information
      • max-groups [Config, Info]: Number of IGMP groups
    • interface [Info]
      • detail : detail interface information
      • vrrp: VRRP information
    • route [Info]: Static route settings
      • <ipv4/mask> [Config, Info]: Next hop address
        • metric : route metric
        • table : routing table name
      • table : routing table name
    • rule table [Config, Info]: Policy based routing table name or table number
      • from <ipv4/mask> [Config]: From IPv4 prefix
      • iif [Config]: Input interface
      • oif [Config]: Output interface
      • to <ipv4/mask> [Config]: To IPv4 prefix
    • sessions [Info]: Show IPv4 connections
      • dstip [Config, Info]: Destination IPv4 address
      • dstport [Config, Info]: Destination port
      • proto [Config, Info]: "L4 protocol (tcp, udp ...)"
      • rdstip [Config, Info]: Destination IPv4 address in the reply direction
      • rdstport [Config, Info]: Destination port in the reply direction
      • rsrcip [Config, Info]: Source IPv4 address in the reply direction
      • rsrcport [Config, Info]: Source port in the reply direction
      • srcip [Config, Info]: Source IPv4 address
      • srcport [Config, Info]: Source port
    • vrrp [Info]: show VRRP interfaces and status
  • ipv6: IPv6 configuration
    • arp-cache [Config]: arp-cache min. number of entries to keep
    • dhcp-server
      • apply [Config]: Apply configuration set in config-file
      • config-file [Config, Info]: Name of the config file
      • edit [Config]: Edit config file
    • interface [Info]
      • detail : detail interface information
      • link-local: include IPv6 link local address
      • vrrp: VRRP information
    • rule table [Config, Info]: Policy based routing table name or table number
      • from <ipv6/mask> [Config]: From IPv6 prefix
      • iif [Config]: Input interface
      • oif [Config]: Output interface
      • to <ipv6/mask> [Config]: To IPv6 prefix
    • sessions [Info]: Show IPv6 connections
      • dstip [Config, Info]: Destination IPv6 address
      • dstport [Config, Info]: Destination port
      • proto [Config, Info]: "L4 protocol (tcp, udp ...)"
      • rdstip [Config, Info]: Destination IPv6 address in the reply direction
      • rdstport [Config, Info]: Destination port in the reply direction
      • rsrcip [Config, Info]: Source IPv6 address in the reply direction
      • rsrcport [Config, Info]: Source port in the reply direction
      • srcip [Config, Info]: Source IPv6 address
      • srcport [Config, Info]: Source port
  • lldp [Info]: LLDP information
    • disable [Config]: Disable LLDP protocol
    • neighbors details [Info]: Show LLDP neighbors
  • netflow [Config, Info]: NetFlow export settings
    • active-timeout [Config]: Active timeout in seconds
    • collector [Config]: Collector''s address and port (default port is 2055)
    • detail [Info]: Verbose output
    • inactive-timeout [Config]: Inactive timeout in seconds
    • license [Config]: License key
    • max-flows: Max number of active flows in cache
    • natevents enable [Config]: Enable exporting NAT events
    • promisc enable [Config]: Enable promisc mode
    • protocol [Config]: NetFlow protocol version
    • template-refresh [Config]: Templates refresh interval (packets)
    • template-timeout [Config]: Templates resend interval (mins)
  • ping [Config]: ping command
    • [Config]
    • count : number of packets
    • interface : output interface name
    • interval : set wait interval in seconds
    • ipv4: force IPv4 protocol
    • ipv6: force IPv6 protocol
    • numeric: do not lookup DNS names
    • size : packet size in Bytes
    • source : source ip address
  • pppoe-server [Config, Info]: PPPoE server
    • config-file [Config]: pppoe config file
    • edit-config [Config]: edit config file
    • edit-secrets [Config]: edit secrets file
    • enable [Config]: enable pppoe server
    • interfaces [Info]: pppoe interfaces config
      • add [Config]: pppoe interface name
      • delete [Config]: pppoe interface name
    • secrets-file [Config]: pppoe secrets file
    • sessions [Info]: show sessions stats
      • ip [Info]: pppoe session IPv4 address
      • user [Info]: pppoe session username
  • reboot [Config]: reboot netx
  • router [Config]: Configure routing protocols
    • bgp neighbor [Info]
    • apply timeout [Config]: number of seconds to revert the configuration
    • check-config [Config]: check the main configuration file
    • config-file [Config, Info]: name of config file
      • apply [Config]: set config file and immediately apply
      • remove [Config]: remove config file
    • confirm [Config]: confirm/revert previously applied configuration
    • edit [Config]: name of config file
    • multicast [Config, Info]: Configure multicast routing
      • apply [Config]: Apply configuration set in config-file after changes
      • config-file [Config, Info]: name of the config file
      • edit [Config]: Edit config file
      • route [Config]: Output interface
        • [Config]: Output interface
        • source [Config]: Source of the multicast traffic
    • protocols [Info]: detailed information
    • routing-table name [Config, Info]: Routing table name
    • this [Info]: this context
  • running-config [Info]: actual configuration
  • save [Config]: save actual configuration
  • shell [Config]: switch to unix shell enviroment
  • snmp-server community [Config]
  • startup-config [Info]: saved configuration
  • sync-manager [Config, Info]: External systems synchronization manager
    • add-weblist [Config]: allowed web match list (ispadmin)
    • coeficient [Config]: shaping coeficient
    • data-source [Config]: data source system
    • db-driver [Config]: database driver
    • db-host [Config]: hostname or IP of database server
    • db-name [Config]: database name
    • db-password [Config]: password for connection to sync database
    • db-qos-min-records [Config]: minimum number of records that must be retreived by the QoS query
    • db-qos-query [Config, Info]: sync manager QoS SQL query file
    • db-scan-interval [Config]: scan interval - number of seconds
    • db-username [Config]: database server user name
    • debug-level [Config]: debug level value
    • edit [Config]: edit SQL QoS query file
    • enable [Config]: enable sync manager
    • force-update [Config]
    • ignore-invalid-certificate [Config]: ignore invalid certificate when connecting to api
    • ispa-data-interpretation [Config]: data interpretation (ispadmin)
    • routerid [Config]: database router id (ispadmin)
    • rules [Info]: show synced rules
      • group [Info]: group name
      • ip [Info]: lookup group by ip
      • mark [Info]: lookup group by mark
    • sync-stats [Config]: synchronize statistics (ispadmin)
  • system [Config, Info]: Set system's basic configuration
    • bridge-pass-filtering [Config]: bridge pass filtering
    • clock [Info]: clock options
      • set [Config]: time in HH:MM:SS format
      • timezone [Config]: set time zone
    • disable-serial-console [Config]: disable serial console
    • domain-lookup [Config, Info]
    • editor [Config, Info]: editor name
    • hostname [Config, Info]: This system's network name
    • kernel [Config, Info]: kernel version
    • logging: logging options
      • facility [Config]: logging facilities
      • server [Config]: logging server HOSTNAME[:PORT] or IP[:PORT]
    • name-server [Config, Info]: IPv4 or IPv6 address
    • ntp [Config, Info]: network time protocol
      • server [Config]: IPv4 addres of NTP server
      • sync [Config]: Force sync time
    • police [Info]: police system audit
      • enable [Config]: enable periodical run of police audit
      • run-now [Config]: run police audit now
    • radius-auth: Radius authentication options
      • map-user [Config]: Local user to map all radius users to
      • server [Config]: Radius server for authentication
        • port [Config]
        • secret [Config]
        • timeout [Config]
    • release-channel: select release channel
      • devel [Config, Info]: enable devel release channel
      • early-access [Config, Info]: enable early access release channel
    • service-module [Config, Info]: Show service module operation values
      • factory-default [Config]: Load default configuration to service module
      • fan speed [Config, Info]: Current fan status
      • fw [Info]: "Manage IPv4 access for service-module"
        • action id src <ipv4/mask> [Config]: Action identificator in range 1 - 10
        • disable [Config]: "Disable IPv4 access for service-module"
        • enable [Config]: "Enable IPv4 access for service-module"
        • id
      • gw [Config, Info]: Service IPv4 gateway
      • ip <ipv4/mask|dhcp> [Config, Info]: Service IPv4 interface
      • mode [Info]: Service IPv4 interface mode
        • dedicated [Config]
        • shared [Config]
      • power [Info]: Current status of power supplies
      • reboot [Config]: Service module cold reboot (take 30-90 seconds)
      • temperature [Info]: Current temperature
      • user [Config, Info]: New user name
        • password [Config]: New password
        • rename [Config]: New user name
    • snmp-server: SNMP community
      • community [Config]: SNMP community
      • contact [Config]: SNMP contact
      • location [Config]: SNMP location
    • statistics [Config]: System statistics
      • cloud-history refresh-interval [Config]: Refresh interval for cloud-history statistics in seconds
      • cloud-id [Config]: Statistics ID - unique client identifier for NetX Cloud
      • cloud-password [Config]: Cloud password for NetX Cloud
      • cloud-username [Config]: Cloud username for NetX Cloud
      • match-list refresh-interval [Config]: Refresh interval for match-list statistics in seconds
    • update nocache [Config]: update system to the latest version
    • update-proxy server [Config]: Proxy server password
      • password [Config]: Proxy server password
      • port [Config]: Proxy server port
      • username [Config]: Proxy server username
    • user [Config, Info]: user management
      • api: set API access via token
        • create-token [Config]: create API JWT token
        • token-expiration [Config]: set token lifetime
      • crypt [Config]: set encrypted password
      • login-shell [Config]: set default login shell
      • password [Config]: set plain text password
      • this [Info]: this context
    • zabbix: zabbix agent options
      • hostname [Config]: zabbix hostname identification
      • server [Config]: Zabbix server for active checks
  • this [Info]: this context
  • traceroute [Config]: traceroute command
    • [Config]
    • interface : output interface name
    • ipv4: force IPv4 protocol
    • ipv6: force IPv6 protocol
    • numeric: do not lookup DNS names
    • source : source ip address
  • traffic-manager [Config, Info]: Traffic manager options
    • config [Info]: show current traffic manager config
    • db-connstr [Config]: connect string
    • db-dbname [Config]: database name
    • db-driver [Config]: database driver
    • db-host [Config]: hostname or IP address
    • db-password [Config]: password
    • db-qos-min-records [Config]: number of records
    • db-qos-query [Config, Info]: SQL query filename
    • db-scan-interval [Config]: number of seconds
    • db-username [Config]: username
    • default-qdisc [Config]: qdisc name
    • edit [Config]: edit SQL QoS query file
    • enable [Config]: enable traffic manager
    • force-update [Config]: force update from database
    • interface [Config]: interface name
    • qos-rules [Config, Info]: show current active top QoS rules
      • active: only rules with non zero statistics
      • adaptive: add adaptive shaping information
      • bps: do not convert speeds to M/K/G/bps
      • detail: detailed output for group
      • group : group name
      • inconsistent-speed: information about inconsistent speed child > parent
      • ip : lookup group by ip
      • mark : lookup by mark
      • offload: show only offloaded rules
      • shape [Config, Info]: Shaping QoS rule
        • adaptive [Config]: Adaptive shaping
        • burst [Config]: Burst options
        • comment [Config]: Comment
        • customid [Config]: Custom ID
        • download [Config]: Download speed
        • ecn [Config]: Codel ECN
        • group [Config]: Group name
        • guaranteed [Config]: Guaranteed capacity in percent
        • halfduplex [Config]: Half duplex shaping
        • mark [Config]: Mark number
        • offload [Config]: Offload shaping
        • parent [Config]: Parent Group name
        • prefix [Config]: IPv4/6 address or prefix
        • priority [Config]: Priority options
        • qdisc [Config]: Queue discipline
        • queuelimit [Config]: Codel queue packet size limit
        • upload [Config]: Upload speed
      • sub-levels : max number of subtree levels
      • top-download: top 10 download rules
      • top-upload: top 10 upload rules
      • verbose: add detailed internal information
    • scheduling-opts [Config]: packet scheduling options
      • algo-hfsc: hfsc packet scheduling algorithm
      • algo-htb: htb packet scheduling algorithm
      • guaranteed-auto: auto compute guaranteed speeds
      • lock-queues : number of locking queues
      • offload-all: offload all shaping rules
      • offload-auto : auto offload shaping when speed exceeds configured value
    • subqueues [Config]: number of seconds
    • this [Info]: this context
  • write [Config]: save actual configuration